Can not calculate a profile from MESA, too many inner points

[gali8292]

Hello GYRE staff,

When I try to calculate a lot of profiles from MESA, the GYRE code got stuck in one profile. The error is

Building frequency scan
added scan interval : 0.6584E-01 -> 0.6584E+00 (500 points, INVERSE)

Building x grid
Found inner turning points, x range 0.0000 -> 0.2173
Adding 6474871 inner point(s)

I assume that there are too many inner points (647871)? How can I fix it?

The 'gyre.in' and the profile are attached.

Cheers

[rhtownsend]

Hello GYRE staff,

When I try to calculate a lot of profiles from MESA, the GYRE code got stuck in one profile. The error is

Building frequency scan
added scan interval : 0.6584E-01 -> 0.6584E+00 (500 points, INVERSE)

Building x grid
Found inner turning points, x range 0.0000 -> 0.2173
Adding 6474871 inner point(s)

I assume that there are too many inner points (647871)? How can I fix it?

The 'gyre.in' and the profile are attached.

Cheers

It seems something is going wrong with GYRE's remeshing routines. I'll have to look into this in further detail. But can I ask where the model comes from -- what sort of a star is it?

Many thanks,

Rich

[gali8292]

Hello GYRE staff,

When I try to calculate a lot of profiles from MESA, the GYRE code got stuck in one profile. The error is

Building frequency scan
added scan interval : 0.6584E-01 -> 0.6584E+00 (500 points, INVERSE)

Building x grid
Found inner turning points, x range 0.0000 -> 0.2173
Adding 6474871 inner point(s)

I assume that there are too many inner points (647871)? How can I fix it?

The 'gyre.in' and the profile are attached.

Cheers

It seems something is going wrong with GYRE's remeshing routines. I'll have to look into this in further detail. But can I ask where the model comes from -- what sort of a star is it?

Many thanks,

Rich

Hi Rich,

The profile document was generated from MESA with the initial mass of 1.3 solar mass and Z of 0.005. I'm expecting your help.

Cheers

Li Gang